Under compartment girders it is possible to assign holes to a cabinet for the specialist beams on the sides or shelves (for safety holes). The assignment is always made segment by segment.
The two fields Edge Bottom and Edge Top make it possible to specify the minimum distance between the first and last holes in a row of holes. A grid must be defined in this segment in the cabinet. For the row of holes, a drilling pattern with only one hole on top of each other should then be used, as this is then inserted repeatedly at grid spacing.
For example, in the cabinet, a value of 2*32 in the shelf number field generates two shelves and a row of holes running over the entire segment at a distance of 32mm. If you now enter 100mm in edge bottom , the first hole is only created at 128mm.
Drill patterns for trays must be created in pairs and with the same name in the folders …\Elements\Drill Images\Fachtraeger_Flaeche and \Fachtraeger_Stirn. The files from \Fachtraeger_Stirn are displayed in the ElementsCAD drill pattern dialog.